2019 New Holland Construction Skid Steer Loaders L220

Selling Price -

$29,900.00

Information

HVAC, Air Ride Seat, Lap Bar, Performance Package, 12x16.5 Tires, 72" Bucket, 2 Speed Hand & Foot Controls

Photos

Highlights

  • $29,900.00
  • Sauk Centre, Minnesota
  • Pre-Owned
  • 13659
  • 2019
  • New Holland Construction
  • Skid Steer Loaders L220
  • JAF0L220AKM472036
  • Pre-filter: spin on @ 30 microns | Main-filter: spin on @ 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • 2300
  • #2 diesel
  • Available
  • Tread: 56.9 in (1448 mm)
  • Bucket hinge pin: 121 in (3073 mm) | Dump Reach Max.: 29.8 in (758 mm)

Specifications

  • 2019
  • New Holland Construction
  • Skid Steer Loaders
  • L220
  • General
  • Pre-filter: spin on @ 30 microns | Main-filter: spin on @ 4 microns | Air intake: Turbocharged Aftercooled with external EGR
  • ISM | Model: N844LTA
  • Diesel 4-stroke, Turbo, D.I.
  • 4
  • 3.31 in (84 mm)
  • 3.94 in (100 mm)
  • 135 in3 (2.2 L)
  • HPCR Direct
  • #2 diesel
  • Liquid
  • High idle - no load: 2825 +/- 25 rpm | Rated - full load: 2800 rpm | Low idle: 1200 +/-50 rpm
  • per SAE J1349 Gross: 67 hp (50 kW) @ 2800 rpm | per SAE J1349 Net: 64 hp (47.7 kW) @ 2800 rpm
  • per SAE J1349 Peak: 153 lb-ft (208 Nm) @ 1800 rpm
  • Type: Spring applied, hydraulic release disc
  • 12" x 16.5" Heavy Duty (70 OTW)
  • 12" x 16.5" Heavy Duty (70 OTW)
  • Lift cylinder: 3450 lbs (15.3 kN) Tip Limit | Bucket cylinder: 7300 lbs (32.5 kN) | Cycle time Raise: 3.5 sec | Cycle time Lower: 2.3 sec | Cycle time Dump: 2.6 sec | Cycle time Roll back: 2.0 sec
  • Low range: 7.8 mph (12.5 km/h)
  • Gear
  • Drive pump mechanical: 25.1 gpm (95 Lpm) | Drive pump electro hydraulic: 25.1 gpm (95 Lpm) | Pump: 20.6 gpm (78 Lpm)
  • Relief: 3046 psi (210 bar)
  • Angle of departure: 25° | Dump angle: 52°
  • Bucket hinge pin: 121 in (3073 mm) | Dump Reach Max.: 29.8 in (758 mm)
  • 44.4 in (1128 mm)
  • 8 in (203 mm)
  • 69.1 in (1755 mm)
  • Tread: 56.9 in (1448 mm)
  • 19.5 gal (73.8 L)
  • 7.5 qt (7.1 L)
  • Chain (per side): 7.9 qt (7.4 L)
  • System with filter: 34 qt (32.2 L)
  • Rated operating load 50% tip: 2000 lbs (905 kg) | Tipping load: 4000 lbs (1814 kg)
  • 6470 lbs (2930 kg)
  • 6170 lbs (2795 kg)