Modern Farm Equipment

Specifications

• 2015 New Holland Construction L218 Base
• Year2015
• ManufacturerNew Holland Construction
• Model NameL218
• Trim NameBase
• Generic Type (Primary)General
• DimensionsBucket hinge pin: 120 in (3048 mm) | Bottom of level bucket, fully raised: 113.3 in (2877 mm) | Clearance circle without bucket: 50.7 in (1289 mm) | Clearance circle rear: 62.9 in (1599 mm)
• Overall LengthWithout attachment with coupler 105.7" (2697 mm)
• HeightDump reach (max height) 30.8 in (783 mm) | Height to top of ROPS: 77.7" (1974)
• Wheelbase44.4 in (1128 mm)
• Ground Clearance(bottom of belly pan) 7 in (178 mm)
• Axle Capacity, Rear36.4 in (924 mm)
• Overall Width66.1 in (1678 mm)
• Angle Positions, ForwardDump angle: 52° | Rollback, bucket on ground / at full height: 35°/88° | Angle of departure: 23°
• Weights
• Weight, In Running Order5930 lbs (2690 kg)
• Load Capacity, LandRated operating load, 50% tip: 1800 lbs (818 kg) | Breakout force: Lift cylinder 2620 lbs (11.7 kg) / Bucket cylinder: 5550 lbs (24.7 kg) | Tipping load: 3600 lbs (1633 kg)
• Engine ManufacturerISM / N844LTA
• Bore3.31 x 3.94 in (84 x 100 mm)
• Stroke3.31 x 3.94 in (84 x 100 mm)
• Displacement135 in³ (2.2 L)
• Fuel InjectionHPCR Direct
• AirflowTurbocharged Aftercooled with external EGR
• Engine PowerGross: 60 hp (45 kW) @ 2800 rpm / Net: 57 hp (42 kW) @ 2800 rpm (Per SAE J1349)
• Torque ConverterPeak Torque 135 lb-ft (183 Nm) @ 1800 rpm
• Top SpeedLow Range: 7.4 mph (11.9 km/h)
• Hydraulics
• Hydraulic PumpPump flow, Standard Flow: 20.6 gpm (78 Lpm)
• Relief Valve Setting3046 psi (210 bar)